If you have broken or damaged a precious piece of jewelry, you should consider getting it repaired. This article will go over various types of repairs, including ring sizing, Chain repair, and Prong repair. You will also learn how to repair broken shanks. Listed below are the steps to take in order to repair your jewelry. This article also includes some useful links to get you started. Listed below are some tips on jewelry resizing.

Ring sizing

A jeweler specializing in jewelry repairs should perform ring sizing before making any other changes to the piece. This procedure involves altering the size of the ring, adding or removing metal. Depending on the design of the ring, this may require cutting or removing stones. The metal is then matched to the existing one. The ring is then polished and cleaned by a jeweler.

A jeweler who performs ring sizing for jewelry repairs should be able to give you a precise fit. Some jewelers only resize rings that they sold. Others will do it for free if the customer brings in the ring in its original size. Regardless of the reason, ring sizing for jewerly repair in NYC is essential for a comfortable fit. A jeweler with expertise in ring sizing will be able to recommend the right size for a particular ring and provide advice for preventing ring rolling.

Chain repair

If your jewelery chain is damaged, it’s worth investigating repair options. Many pieces of jewelry can be repaired, but not all repairs are created equal. Some jewelers may not even attempt to fix a broken piece of jewelry. However, if your jewelry is within a standard thickness of 1.4mm, a jeweler should be able to fix the piece of jewelry for you. In these cases, a jeweler will need to cut the broken link open and thread it through another link. Then, they’ll use solder to seal the gap shut.

A chain can be damaged through acute trauma, like hanging it up or taking it off while you wear it. In most cases, the damage is localized. Individual links can be repaired through laser welding or soldering. Make sure not to stretch the repaired piece, or it won’t last long. You can also look for problems with the clasp, which will lead to further repair costs. And if TNS Diamonds want to maintain the quality of your jewelery, consider setting up a repair section.

Prong repair

There are several methods to fix prongs on your jewelery. The most common one involves adding gold solder to the existing prong. The replacement metal is bonded to the setting using a torch. This method requires a high level of heat, so only faceted stones can undergo prong repair. Jewelers may also use laser technology to fix jewelry. This method ensures a clean result and less risk to surrounding stones.

Another popular way to repair jewelry is to replace prongs. Rings have small prongs, which hold gemstones securely in place. Over time, these prongs can become worn down or completely broken. In this case, a skilled jeweler can replace the prong, re-tip it, or fix the prongs. If you’re not comfortable repairing your jewelry yourself, you should seek professional help.

Broken shank repair

There are a few different ways to fix a broken shank in jewerly. The simplest method involves using pliers to bend the gold until it is flush with the other side. Next, hard solder is applied to the seam. This is where the new shank goes. It is then soldered into place. When the repair is complete, the ring will be ready to wear again. Here are some tips to make this repair easier:

Depending on the damage, the price of the ring will be different. If TNS Diamonds is cracked, the jeweler will supply a new solid piece of precious metal to fix it. The additional cost will include the costs of resizing the ring. The higher the difference in size, the more material and labor will be needed. Moreover, more valuable the metal, the higher the price. So, if your shank is cracked, make sure to go to a jeweler who is reputable and has a good reputation.

Rhodium plating

If your jewelery has a scratch or chip, you can get it repaired or plated by a jewelry shop. The process involves cleaning and polishing the piece of jewelry. It then gets dipped into an ultrasonic unit to remove any debris that could hinder the rhodium from adhering. Afterward, the jewelry is rinsed in an electrocleaning base. You should keep it away from chemicals and residue that can wear away the rhodium coating.

Before rhodium plating, it is imperative to carefully clean the item of jewelry. The solution used for electroplating contains sulfuric acid, which is a dangerous substance. In addition, the process produces acidic fumes. Wear a protective mask or use a well-ventilated room to avoid respiratory complications. If the item of jewelry is soft, it may have to be removed before rhodium plating.

Custom design work

Custom design work for jewelry repairs is an important step in maintaining and restoring your favorite piece of jewelry. A talented jeweler will work with you to design and create a beautiful piece, based on your design. In-store care is also included, and the work is often carried out by a skilled and experienced jewelry repair technician. Custom design work for jewelry repairs is often a great option for weddings, anniversaries, or birthdays.